Part Number Hot Search : 
MN101 MSIW2032 PDI1394L SAA7346 B40J10 HPR1015 TDA98 BAV21
Product Description
Full Text Search
 

To Download AD4C311 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 AD4C311
Dual 1 Form A Solid State Relay DESCRIPTION
The AD4C311 is a bi-directional, double-pole, single-throw, normally open multipurpose solid-state relay. It is designed to replace electromechanical relays in general purpose switching applications. The relay consists of two integrated circuits, each driving a pair of rugged source-to-source enhancement type DMOS transistors. Each integrated circuit is optically coupled to a light emitting diode. The output MOS transistors are protected with free-wheeling diodes that can handle up to 1.5A of inrush current, making the relay ideal for switching lamps and highly inductive loads.
FEATURES
APPLICATIONS
* * * * *
Low input control power consumption (2.5mA TYP) 200mA maximum continuous load current 10 ohms maximum on-resistance High input-to-output isolation Long life/high reliability
* * * * * *
Multiplexers Meter reading systems Data Acquisition Medical equipment Battery monitoring Home/Safety security systems
OPTIONS/SUFFIXES*
ABSOLUTE MAXIMUM RATINGS*
PARAMETER Storage Temperature Operating Temperature Continuous Input Current Transient Input Current Reverse Input Control Voltage Output Power Dissipation UNIT C C mA mA V mW 6 800 MIN -55 -40 TYP MAX 125 85 40 400
* *
-S -TR
Surface Mount Option Tape and Reel Option
NOTE: Suffixes listed above are not included in marking on device for part number identification.
SCHEMATIC DIAGRAM
*The values indicated are absolute stress ratings. Functional operation of the device is not implied at these or any conditions in excess of those defined in electrical characteristics section of this document. Exposure to Absolute Ratings may cause permanent damage to the device and may adversely affect reliability.
APPROVALS
* * *
BABT CERTIFICATE #608204 CSA CERTIFICATE #LR111581-1 UL / C-UL FILE #E201932
(c) 2004 Solid State Optronics * San Jose, CA www.ssousa.com * +1.408.293.4600
Page 1 of 5
AD4C311 rev 1.40 (10/25/2004)
AD4C311
Dual 1 Form A Solid State Relay
ELECTRICAL CHARACTERISTICS - 25C
PARAMETER INPUT SPECIFICATIONS
LED Forward Voltage LED Reverse Voltage Turn-On Current Turn-Off Current V V mA mA 6 1.2 12 2.5 0.5 5 1.5 If = 10mA Ir = 10uA Io = 200mA
UNIT
MIN
TYP
MAX
TEST CONDITIONS
OUTPUT SPECIFICATIONS
Blocking Voltage Continuous Load Current On-Resistance Leakage Current Output Capacitance Offset Voltage V mA A pF mV 6 0.2 25 400 200 10 1 50 0.2 Io = 1uA If = 5mA Io = 200mA Vo = 400V Vo = 25V, f = 1.0MHz If = 5mA
COUPLED SPECIFICATIONS
Isolation Voltage -H Suffix Turn-On Time Turn-Off Time Isolation Resistance Coupled Capacitance Contact Transient Ratio V V ms ms G pF V/ s 2000 100 2 7000 dV = 50V 2500 3750 1.5 0.5 3 1 T = 1 minute T = 1 minute If = 5mA, Io = 200mA If = 5mA, Io = 200mA
(c) 2004 Solid State Optronics * San Jose, CA www.ssousa.com * +1.408.293.4600
Page 2 of 5
AD4C311 rev 1.40 (10/25/2004)
AD4C311
Dual 1 Form A Solid State Relay
PERFORMANCE DATA
AD4C311 Typical Turn-On Time Distribution N = 100, Ambient Temperature = 25C
AD4C311 Typical Turn-Off Time Distribution N = 100, Ambient Temperature = 25C
60 50 40 30 20 10 0 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2 Turn-On Tim e (m s)
60 50 40 30 20 10 0 0.02 0.03 0.04 0.05 0.06 0.07 0.08 0.09 Turn-Off Tim e (m s)
Device Count
AD4C311 Typical On-Resistance Distribution N = 100, Ambient Temperature = 25C
Device Count
AD4C311 Typical Leakage Current Distribution N = 100, Ambient Temperature = 25C
40 Device Count Device Count 5.75 6 6.25 6.5 6.75 7 7.25 7.5 30 20 10 0 On-Resistance (ohm s)
100 80 60 40 20 0 0.15 0.2 0.25 0.3 0.35 0.4 0.45 0.5 Leakage Current (uA)
AD4C311 Typical Blocking Voltage Distribution N = 100, Ambient Temperature = 25C
AD4C311 Maximum Load Current vs. Temperature
Load Current (mA)
40 Device Count 30 20 10 0 400 410 420 430 440 450 460 470 Blocking Voltage (V)
250 200 150 100 50 0
20 40 60 -4 0 -2 0 80 0
Tem perature (C)
(c) 2004 Solid State Optronics * San Jose, CA www.ssousa.com * +1.408.293.4600
Page 3 of 5
AD4C311 rev 1.40 (10/25/2004)
AD4C311
Dual 1 Form A Solid State Relay
MECHANICAL DIMENSIONS 8 PIN DUAL IN-LINE PACKAGE 8 PIN SURFACE MOUNT DEVICE
END VIEW
END VIEW
TOP VIEW
TOP VIEW
BOTTOM VIEW/ BOARD PATTERN
BOTTOM VIEW/ BOARD PATTERN
(c) 2004 Solid State Optronics * San Jose, CA www.ssousa.com * +1.408.293.4600
Page 4 of 5
AD4C311 rev 1.40 (10/25/2004)
AD4C311
Dual 1 Form A Solid State Relay
DISCLAIMER
Solid State Optronics (SSO) makes no warranties or representations with regards to the completeness and accuracy of this document. SSO reserves the right to make changes to product description, specifications at any time without further notice. SSO shall not assume any liability arising out of the application or use of any product or circuit described herein. Neither circuit patent licenses nor indemnity are expressed or implied. Except as specified in SSO's Standard Terms & Conditions, SSO disclaims liability for consequential or other damage, and we make no other warranty, expressed or implied, including merchantability and fitness for particular use.
LIFE SUPPORT POLICY
SSO does not authorize use of its devices in life support applications wherein failure or malfunction of a device may lead to personal injury or death. Users of SSO devices in life support applications assume all risks of such use and agree to indemnify SSO against any and all damages resulting from such use. Life support devices are defined as devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when used properly in accordance with instructions for use can be reasonably expected to result in significant injury to the user, or (d) a critical component in any component of a life support device or system whose failure can be reasonably expected to cause failure of the life support device or system, or to affect its safety or effectiveness.
(c) 2004 Solid State Optronics * San Jose, CA www.ssousa.com * +1.408.293.4600
Page 5 of 5
AD4C311 rev 1.40 (10/25/2004)


▲Up To Search▲   

 
Price & Availability of AD4C311

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X